How to flash Vu+ Image via USB

[rednass]

1. Save the image on the PC (USB version)
2. Format USB flash drive with the file system FAT,or FAT32
3. Unzip your image straight on USB stick
4. Check USB stick if folder vuplus has been created in root directory
5. Power off VU+ STB
6. Remove all USB devices from the box
7. Plug-in the USB Stick into front USB port of solo2
8. Turn on the VU+ STB
9. Press front on/off button on your solo2 when stb will ask you to do so
10. Firmware Update will start automatically
11. Wait for info "Finished ... please reboot"
12. Unplug the USB Stick from the box
13. Power off the VU+ STB , and restart it again
14. Wait for Image to Reboot

Solo
How to flash Vu+ Solo with USB Pen Drive
1. Download a new USB image file & extract it to your USB Drive.
2. Check USB stick if folder vuplus has been created in root directory
& that in it is the vuplus folder.
You should have a folder structure on your PEN drive root like this:

Code:

/vuplus/solo/

with the following files in it:
Code:

boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2

3. Power Off Solo
4. Insert USB Pen Drive in the front USB socket.
5. Power on Solo - The display window will show an orange/red LED constantly lit. This means it's reading the data from the USB Pen into the buffer.
Then...
The display window will show the orange/red LED flashing.
This means it's now flashing the data to the receiver.
Wait until the LED changes to a Green Flashing LED.
6. When Green LED is flashing you can now safely power off the receiver and remove the USB Pen Drive.
7. Now Power on and wait for the receiver to boot.
8. Enjoy your new image.